Aerial platform 40 м Hansin HS4070
Overall dimensions, L x W x H, mm - 8 370 x 2 325 x 3 780
Attachment weight -9 100 kg
It's easy to rent a 40m aerial platform! Click on the "Submit Application" button or call us!
Aerial platform Hansin 4070 based on Hyundai Gold (HD120).
Hyundai Gold is equipped with a diesel engine with a turbocharger and an intercooler, the maximum power is 225 hp. and a volume of 6.606 liters.
Maneuverability: minimum turning radius 6.3 m.
The maximum lift level is 39.
Safety - hydropneumatic brake system, drum type on all wheels, two circuit.
Arrow:
- 7-section telescopic octagonal;
- Simultaneous extension type;
- Material: DOMEX high strength steel;
- Control: remote, from the operator's cab, bottom lever control on the platform.
Outriggers
- Stem Width: Front 6700mm, Rear 6200mm
- Type: front and rear X-shaped, hydraulic
- Material: High strength structural steel
- Controls: bottom lever control on the platform left and right.
Worksite
- Size: 3,000 x 1,100 mm
- Rotation angle: rotates left and right 360 degrees
Aerial platform equipment
- Operator cab: closed type with air heater and fuel regulator.
- Control levers: boom sections, platform and platform swivel, cargo winch.
- Remote control, walkie talkie.
- SPTA
- Electric oil cooler
- Outrigger and platform lights
Safety devices
- Electric motor and additional hydraulic pump to fold the aerial platform in the event of failure of the vehicle's main engine.
- Automatically limit worker processes on overload.
- System for automatically determining the horizontal plane of the working platform and protecting the boom from impact with an object.
- Sensors: rollover warning, boom position safety, weight load, boom position monitoring, rollover warning, platform oversteer.
- Outrigger position sensors.
- Keys: emergency stop, emergency folding boom sections.
- Digital anemometer - allows you to display the wind speed on the operator's cab display. The alarm is triggered if the wind speed exceeds the permissible limits.
The HS 4070 aerial platform has a number of improvements and changes compared to other aerial platforms:
- Twisting of the main highways is excluded in the model, the subframe is reinforced, the length of the outriggers is installed.
- Steel is fully replaceable with domex high-strength steel. New paint coating technology.
- Updated plastic operator's cab.
- There were changes in the electrical system of the installation, it was equipped with software, microcircuits, fuses, a monitor.
- The aerial platform is equipped with three hydraulic locks - 1 for each cylinder and an additional central hydraulic lock.
- Maximum safety is ensured by digital information of the load being lifted under the cradle, fittings protect against delaying the basket from tilting to the level, and a special system prevents the cradle from tipping over. Changed weight sensors to Bongshin. A weight monitor is installed under the basket.
- The reliability of the sections has been increased, the external cylinder has been removed, which ensured the synchronous extension of the sections. In the design of the boom, the cable was replaced with chains from the 1st to the 3rd section.
More photos and videos with a description of the work can be viewed here: OUR WORKS
